Description
- Finger receptor kit for Flexxifinger Pulse Crop Lifters
- Holds 0.635 in. (16 mm) diameter nylon fingers
- Gold-coloured adjustable receptor lets the operator fine-tune the lifter’s forward lifting point for specific conditions
- Kit includes carriage bolt and lock nut — buy this kit instead of receptor-only 40116 when the bolt and nut are needed too
- Use with Pulse nylon fingers 33048 (0.635 x 2.75 in.) or 33050 (0.635 x 4.75 in.), sold separately; finger sold separately
Technical data
- 0.635 in. (16 mm) diameter receptor
- Kit hardware per the Flexxifinger dealer binder Pulse parts listing: 32300 8 mm carriage bolt and 32301 8 mm lock nut
- Fits Pulse Crop Lifters 70060 (N) and 70062 (J)
- Parts diagram: Flexxifinger dealer binder (parts listings and diagrams)
Installation
- Assemble the receptor with the included 8 mm carriage bolt and 8 mm lock nut, then install the nylon finger into the receptor: rest the back of the receptor on vise jaws, match the flat sections like a key into a lock, and tap the finger in with a rubber mallet until it has bottomed
- The receptor is only loosely attached at the factory — tighten it, but do not overtighten, because it will require adjustment once all the fingers are in place; once the finger has bottomed, rotate it 90 degrees with pliers to lock it into place, with the right side down
- Installation guide: Pulse Crop Lifters — Installation & Adjustment Instructions (Flexxifinger, PDF)
Tips & tricks
- If a finger will not push into the receptor, check that the flat sections of the finger and receptor are not misaligned before forcing it — attempting to force a misaligned finger may damage the finger
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
