85-H33P65, Handler Iii - 3" ***Call for Shipping***

HANDLER III - 3” , RECIRC KIT, BASE FRAME, 3" PUMP

QUICK SPECIFICATIONS

70 US GAL/275L 3” CAMLOCK CONNECTIONS 16” HINGED AND LOCKABLE LID 2” DUAL PORT VENTURI 3” BANJO PUMP/GX200 HONDA ENGINE ROTOCRAFT TANK RINSING NOZZLE

The H33P65 is the largest model in the Handler line to utilize the one-piece bypass tube. The one piece rotationally molded bypass tube has a perfectly smooth inner wall and eliminates the turbulence caused by wall irregularities found with flanged or threaded fitting connections. In addition, the larger elliptical centre section acts as a turbulence dampener which further reduces flow losses. All together, testing has shown the bypass tube to improve bypass flow by 5% over similar plumbing made with threaded or flanged fittings. Designed specifically to work with a Banjo 300PO pump powered by a GX200 Honda engine, the 3” bypass tube maximizes the possible flow from this pump. The bypass tube is available on all Handler models that are equipped with this pump.

Features include:

Full 10L/20L container emptying and rinsing capabilities. Dual port venturi with Handler and bulk draw capabilities. Integrated transfer pump. Comes with the original Handler knife. Closed loop recirculation and agitation. Tank emptying by venturi or direct pump draw.