{"product_id":"flex32256-qd-nut","title":"FLEX32256 QD NUT","description":"\u003cul\u003e\n\u003cli\u003eQD Nut — the quick-detach nut used to attach Flexxifinger crop lifters to virtually any header\u003c\/li\u003e\n\u003cli\u003ePatented QD technology: lifters install and remove in minutes without removing the guard bolt each time — the QD nut stays on the header and the lifter slides off it\u003c\/li\u003e\n\u003cli\u003eSold individually; the complete assembly with 55 mm hex bolt and washers is part 32256-50\u003c\/li\u003e\n\u003cli\u003eAll Flexxifinger crop lifters use the patented QD attaching and detaching technology\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThreads onto the M10 hex head bolt supplied with every lifter, or onto any of the optional Flexxifinger carriage bolts (32310, 32312, 32314)\u003c\/li\u003e\n\u003cli\u003eTighten QD nuts to 60 ft-lb (81 Nm) once installed; once installed, the QD nuts can remain on the header even when the crop lifters are not being used\u003c\/li\u003e\n\u003cli\u003eEarlier part number 32254 was replaced by 32256 (supplier sheet)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThread the QD nut onto the bolt after the spacing washers are in place, then tighten to 60 ft-lb (81 Nm)\u003c\/li\u003e\n\u003cli\u003eTo remove a lifter, lift the black QD spring high enough to clear the top of the QD nut, then pull the lifter forward — the nut itself stays on the header\u003c\/li\u003e\n\u003cli\u003eInstallation guide: \u003ca href=\"https:\/\/flexxifinger.com\/files\/Pulse_Crop_Lifter_Instructions_2024.pdf\"\u003ePulse Crop Lifters — Installation \u0026amp; Adjustment Instructions (Flexxifinger, PDF)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTips \u0026amp; tricks\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eNut-only vs assembly: buy this nut alone when only the nut needs replacing; buy 32256-50 when the bolt and washers are needed too (for example, to mount additional lifters)\u003c\/li\u003e\n\u003cli\u003eIf a lifter will not slide on or off the nut with ease, the washer count is likely wrong — consult the instruction manual for the washer count for the guard\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Flexxifinger","offers":[{"title":"Default Title","offer_id":67843593011502,"sku":"FLEX32256","price":21.99,"currency_code":"CAD","in_stock":true}],"url":"https:\/\/agri-auto.com\/products\/flex32256-qd-nut","provider":"Saskatoon Agri-Auto Parts Inc.","version":"1.0","type":"link"}