Description
- Pulse Crop nylon finger, original style, 2.75 in. long
- Replacement finger for Flexxifinger Pulse Crop Lifters
- Sold individually
Technical data
- Diameter x length: 0.508 in. x 2.75 in.
- Material: nylon
- Style: original style (old style)
- Fits old-style 0.508 in. receptors on Pulse Crop lifters; it is not the current 0.635 in. Pulse finger size
Installation
- Seat the finger fully into the lifter receptor, matching the flat section on the finger body to the flat section on the receptor, like a key into a lock; tap with a rubber mallet or hammer until it has fully seated into the receptor
- Once fully seated, rotate the finger 90 degrees with pliers or a wrench to lock it into place; if it is hard to turn, it may not be fully seated
- Loosen the receptor lock nut from the carriage bolt to adjust the finger angle; the adjustable receptor lets the operator fine-tune the location of the forward lifting point for specific conditions
- Set the finger angle to a maximum of 25 degrees from the ground, with the finger tip about 1/2 in. (13 mm) to 3/4 in. (19 mm) above the ground, and set all lifters to the same angle so they work in unison
- The tail of the finger guides the plant material over the knife
- Installation guide: Pulse Crop Lifters — Installation & Adjustment Instructions (Flexxifinger, PDF)
Payment & Security
Vos informations de paiement sont gérées de manière sécurisée. Nous ne stockons ni ne pouvons récupérer votre numéro de carte bancaire.
