{"product_id":"flex20235-2-flexxifloat-shoe-2-hole-with-roll-pin","title":"FLEX20235.2 FLEXXIFLOAT SHOE 2-HOLE WITH ROLL PIN","description":"\u003cul\u003e\n\u003cli\u003eReplacement steel shoe for FlexxiFloat crop lifters — sold separately from the lifter\u003c\/li\u003e\n\u003cli\u003e2-hole Long shoe — fits FlexxiFloat 200 and 250 lifters (73200, 73250, 74200, 74250)\u003c\/li\u003e\n\u003cli\u003eRecommended for hail damaged or sawfly damaged cereals, milo or grain sorghum\u003c\/li\u003e\n\u003cli\u003eWith proper adjustment will also perform well in pulse crops\u003c\/li\u003e\n\u003cli\u003eLeaves a taller stubble\u003c\/li\u003e\n\u003cli\u003e2 roll pins included (replacement roll pin part 20610)\u003c\/li\u003e\n\u003cli\u003eSold individually\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTechnical data\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShoe size per the Flexxifinger dealer binder shoe chart: 1 in. x 7.75 in. (26 mm x 197 mm)\u003c\/li\u003e\n\u003cli\u003eFits FlexxiFloat 200\/250 lifters 73200, 73250, 74200 and 74250 — the lifter is sold without a shoe, so the shoe is ordered separately\u003c\/li\u003e\n\u003cli\u003eMounts on the lifter arm tenon and is secured with the two included roll pins, one per hole\u003c\/li\u003e\n\u003cli\u003ePart of the 6-shoe FlexxiFloat shoe family: 20231.1 Tip, 20232.1 Wide Tip, 20233.1 Short, 20234.1 Long, 20235.2 2-hole and 20236.1\u003c\/li\u003e\n\u003cli\u003eFitting chart note: the Flexxifinger fitting chart recommends the 74250 lifter with the 20235 shoe on AGCO\/Claas\/Lexion 1200 Multiflex headers (guard 05212821)\u003c\/li\u003e\n\u003cli\u003eNaming note: the manufacturer lists this shoe as the Long shoe (2-hole); the single-hole Long shoe is the separate part 20234.1 — order by part number where the two Long shoes could be confused\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSlide the shoe onto the tenon (projection) at the tip of the lifter arm until the holes in the shoe and tenon line up\u003c\/li\u003e\n\u003cli\u003eInsert a roll pin into each hole of the shoe and, using a hammer, pound each pin in until the end of the roll pin is flush on both sides of the shoe — the installation instructions call for repeating this step for the second roll pin when installing the long shoe\u003c\/li\u003e\n\u003cli\u003eSet the lifting angle with the adjustment screw and jam nut: maximum 22 degrees from the ground, with the back half of the shoe contacting the ground and the tip of the shoe about 1\/2 in. (13 mm) to 3\/4 in. (19 mm) above the ground — a smaller angle is better for lifting the plant\u003c\/li\u003e\n\u003cli\u003eDo not turn the adjustment screw in too far: it reduces the lifter's ability to follow the ground and increases the chance of damaging the lifter and\/or header\u003c\/li\u003e\n\u003cli\u003eNote on the lifter tail: the tail is included with the lifter but left uninstalled, so the lifter can be used with or without it — the tail can provide additional lift in lighter crop situations but is not recommended when harvesting heavy crops, as heavy crop may push the tail down, pivoting the tip upward so it rides over downed crop instead of lifting it\u003c\/li\u003e\n\u003cli\u003eInstallation and Adjustment Instructions: \u003ca href=\"https:\/\/flexxifinger.com\/files\/FlexxiFloat%20200%20and%20250%20%20Instructions%202024.pdf\"\u003eFlexxiFloat 200 and 250 Installation and Adjustment Instructions (PDF)\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTips \u0026amp; tricks\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eShoe choice by condition: choose the 2-hole Long shoe for hail or sawfly damaged cereals, milo or grain sorghum; with proper adjustment it will also perform well in pulse crops, and it leaves a taller stubble\u003c\/li\u003e\n\u003cli\u003eThe FlexxiFloat spring pivot lets the lifter follow ground fluctuations, making it ideal for uneven ground conditions\u003c\/li\u003e\n\u003cli\u003eShoes are wear parts: replace a worn shoe and fit new roll pins (part 20610) rather than running a loose or worn shoe\u003c\/li\u003e\n\u003cli\u003eFlexxiFloat lifters are all steel and will not bend — use extreme caution when travelling over irrigation ruts, sprayer and tractor ruts, large cracks in the ground and other uneven ground conditions\u003c\/li\u003e\n\u003c\/ul\u003e\n","brand":"Flexxifinger","offers":[{"title":"Default Title","offer_id":67843590521134,"sku":"FLEX20235.2","price":19.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0039\/9166\/6737\/files\/74250-with-20235-shoe_a0fbf55c-625e-440f-bf49-217d7f46e7d5.webp?v=1793046305","url":"https:\/\/agri-auto.com\/fr\/products\/flex20235-2-flexxifloat-shoe-2-hole-with-roll-pin","provider":"Saskatoon Agri-Auto Parts Inc.","version":"1.0","type":"link"}